Hines Bending Logo      
the undisputed global leader in mandrel and induction bending machines

 


(800) 949-8344
toll free in U.S. and Canada
   

The Hines Mandrel 060 CNC-B Bending Machine

 
THE HINES 060 CNC-B BENDER WAS DESIGNED TO RUN CLOCKWISE OR COUNTER CLOCKWISE.

THE HINES 060 CNC-B BENDER WAS DESIGNED TO RUN CLOCKWISE OR
COUNTER CLOCKWISE.

We needed a high volume, low cost machine. The Hines 060 CNC-B produces short run, small parts at hyper speed.

If you need a versatile mandrel CNC bending machine,
then the Hines 060 CNC-B Bending Machine exceeds all expectations. The 060 CNC-B Bender was designed to
run clockwise or counter clockwise allowing the length
of the tube/pipe clearance at the front of the machine to complete a bend to side 1 of the machine. Its ability to produce a high volume of short run, small parts means
you will be able to recoup your investment very quickly.

Incomparably, the 060 CNC-B Bender's ability to produce
high quality bends at high volumes is without equal.

Mandrel 060 CNC-B Bender Industry Applications

The 060 CNC-B Bender is a clear favorite among firms in
the automotive, food, fuel line, hydraulic line, appliance
and ice cream machine manufacturing industries.

If you need a machine or tooling quote, click here.

   
 
  • Specifications
  • Footprint
  • Pricing

FEATURES

• 12" CRT Touchable Panel (Digital 477)
• Simple input of machine parameters, DOB, DBB, POB
  (PLC-FX2N series Mitsubishi)
• Memory capacity: 200 job storage, 6 bends per part
• Operational modes: jog, step and auto
• Self diagnosis: displays of fault source and remedies
• Identification of single bend from multi-bend part.
• Self option carriage use
• Safety auto prevention from bending operation when last
   end section is too short
• Speed levels of DOB, DBB, and POB: 16 variable settings
• Repeatability precision: DOB/POB: 0.1deg; DBB: 0.1mm
• Resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Parameter preset resolution: DOB/POB: 0.1deg; DBB: 0.1mm
• Northman Directional Valves
• Preset of processing, i.e., with mandrel or without mandrel,
  auto mandrel lubrication, speed levels of DOB, DBB, and
  POB / Servo System - Series A, National (Japan)

STANDARD
• Pressure Die Holder
• Wiper Die Holder
• Overhead Tie Bar (Eliminates Die Deflection)
• Pressure Die Assist
• Servo Carriage Boost
• Panasonic Servo Motors
• Mandrel Lubricator
• Mandrel Extractor
• Mandrel Early Out Programmable
• Touch Screen (Proface America)
• Clockwise Rotation

ADDITIONAL SPECIFICATIONS FOR THE 060 CNC-B
• Capacity: .750" O.D. x .060 Wall
• Maximum Feeding: 245 feet/minute
• Maximum POB: 80 r/min
• Standard Maximum Radius: 2 1/2 inch
• Maximum Bend Angle: 190 degrees
• Operating Pressure: 700 psi
• Reservoir Capacity: 80 U.S. Gallons
• Approximate Weight: 2200 lbs
• Approximate Dimensions: 6' L x 31" W x 42" H
• Voltage: 220 volt/3 Phase/60Hz; 50Hz Optional
• Bend angle accuracy + / -: 0.1 degree
• Bend arm speed: 20 rpm
• Maximum tube length over mandrel: 44"
• Motor: 4HP

   
PENDING

download Hines 060 CNC-B Footprint PDF    download Hines 060 CNC-B Specifications PDF

•Price
    • Please call for a quotation.
    • Ask about pricing in Canada and internationally.
    • Review Warranty, Terms + Conditions
• Availability
    • Hines Bending stocks several popular models, including the 150 NC, 200 NC, 300 NC and the 600 NC
    • Check the BenderMarket for in stock and used equipment.
• Training: Hines Bending Systems offers several levels of training
    • FREE
        • At our headquarters at Hines Bending University in Fort Myers, Florida
    • FEE-BASED
        • Happy to provide a cost estimate if you require on site training
• Financing
• Contact us at (239) 433-2132, or contact
    • Direct through Intech Funding Corporation
• Other
    • Need Lubricants
    • Request a Tooling Quote