Hines Bending Systems, Inc.
CONTACT US 800-949-8344 US & CANADA
Industry's Best Source for Mandrel Tube and Pipe Bending Machines & Bending Equipment -- Exhaust Bending, Automotive & More
HOME MANDREL TUBE BENDING MACHINES CUSTOMER SUCCESS TUBE BENDING SEMINARS CUSTOMER SERVICE
 
Need another dimension? Try the Mandrel Bending Machine 150CNC-B.
Hines Mandrel Bending Machine 
    Key Features of the CNC Series  
  • 12” CRT Touchable panel (Digital 477)
  • Simple input of machine parameters, DOB, DBB, POB ( PLC -FX2N series Mitsubishi)
  • Memory capacity: 200 job storage, 6 bends per part
  • Operational modes: jog, step and auto
  • Self diagnosis: Displays of fault source and remedies
  • Identification of single bend from multi-bend part. Self option of carriage use
  • Safety auto prevention from bending operation when last end section is too short
  • Speed levels of DOB, DBB, & POB: 16 variable settings
  • Repeatability precision: DOB/POB: 0.1 deg;
    DBB: 0.1 mm
  • Resolution: DOB/POB: 0.01 deg; DBB: 0.01 mm
  • Parameter preset resolution: DOB/POB: 0.1 deg;
    DBB 0.1 mm
  • Northman Directional Valves
  • Preset of processing, i.e. With mandrel or without
    mandrel, auto mandrel lubrication, speed levels of DOB, DBB & POB / Servo System- Series A,
    National (Japan)

CAPACITY

  • Pipe: 1-1/4" x schedule 10
  • Round Tube: 1.660” O.D. x .109 wall


Model 150CNC-B

 

 

 

 

 

 

 

 
Example of Serpentine CNC Bending using Hines Bending Systems Example of a CNC Pipe using Hines Bending Systems
 
Shown Left: Featured bend: serpentine CNC bends.
Shown Right: Closeup of a stainless steel CNC bend.

View Footprint
 
PLEASE NOTE:
There is an additional fee for on-site training and seminars. A comprehensive training video is available free of charge.

U.S., Canada & International rates.
  Hines Mandrel Bending Machine Model 150CNC-B Comprehensive List of Features


     STANDARD

  • Drop Away Clamp Holder
  • Pressure Die Holder
  • Wiper Die Holder
  • Overhead Tie Bar (eliminates die deflection)
  • Tube Part Counter
  • Pressure Die Assist (boost)
  • Panasonic Server Motors
  • Mandrel Lubricator
  • Mandrel Extractor
  • Mandrel Early Out Programmable
  • Touch Screen (Proface America - Chicago)
  • Clockwise Rotation


     ADDITIONAL

  • Maximum Feeding: 165 ft/min
  • Maximum POB: 40 rad/min
  • Standard Maximum Radius: 8 inch
  • Center Line Height (bend die): ___ mm
  • Maximum Bend Angle: 190 degrees
  • Bend Angle Accuracy +/- .01 degree
  • Bend Arm Speed: 0-6 RPM
  • Maximum Tube Length over Mandrel: 5 FEET
  • Motor: 10 HP
  • Operating Pressure: 1500 PSI
  • Reservior Capacity: 120 U.S. Gallons
  • Approximate Weight: 7000 lbs
  • Approximate Dimensions: 12’L x 5’W x 4’H
  • Voltage: 220 volt/ 3 Phase/60Hz; 50 Hz Optional
 
MANDREL TUBE BENDING MACHINES


Hines 150 NC

Hines 200 NC

Hines 300 NC

Hines 600 NC

Hines 800 NC

Hines 300 NC-P

Hines 150 CNC-B

Hines 200 CNC-B

Hines 300 CNC-B

Hines 600 CNC-B

Hines 800 CNC-B

Hines Hand Bending


OTHER LINKS


Warranty Registration Form

Common Bending Terms

Tube Training Seminars

Financing Options

Lubricants

Warranty Terms & Conditions

Machine & Tooling Quotation Request
 
Copyright © 1996-2008. All Rights Reserved. Hines Bending Systems, Inc. 2710 Swamp Cabbage Court, Fort Myers, FL 33901 (800) 949-8344 US/Canada    (239) 433-2132

Home | Mandrel Tube Bending Machines | Customer Success | Tube Bending Seminars | Customer Service